120 min

*This machine requires training (~30 min.)Heat treating furnace- Capacity: 12"W x 7"H x 19"D- Max Temperature: 2250 F- Argon/Nitrogen atmosphere capabilityNote: This machine must only be operated by a trained user. If you anticipate being a heavy use

480 min

*This machine requires training (~1 hour.)Heat treating furnace- Capacity: sample must fit within 3" diameter and ideally be under a few inches in length. (Furnace is generally used for small samples).- Max Temperature: 1600C.- Can create various atm

120 min

*This machine requires training (~30 min.)Heat treating furnace- Capacity: 40mm diameter with max length of 200mm. (Furnace is generally used for very small samples).- Max Temperature: 1100C (1000C continuous).- Vacuum Level: 5.0 x 10^-3 mBar.Note: T

120 min

*This machine requires training (~30 min.)Heat treating furnace- Capacity: 10"W x 8"H x 18"D -Max Temperature: 2350 FNote: This machine must only be operated by a trained user. If you anticipate being a heavy user of this machine you may be elig

30 min

*This machine requires training (~15 min.)

60 min

*This machine requires training (~15 min.)The LECO MSX250 Series sectioning machine is ideal for obtaining medium-sized sections from automotive, ceramic, and composite materials. Note: This machine must only be operated by a trained user.

60 min

*This machine requires training (~30 min.)Range of Airflow: 5-110 mphCross Sectional Area: 1.5' X 1.5'Door Size: 6" circle or 1.5' X 2.5'This Wind Tunnel can use the ELD and the Aerolab Sensing devices.ELD Specs:Max Lift: 15 lbs.Max Drag: 8 lbs.Aerol

60 min

*This machine requires training (~30 min.)Range of Water flow: 0-4 m/sCross Sectional Area: 8"x 8"Door Size: 32" x 8"Note: This machine must only be operated by a trained user. If you anticipate being a heavy user of this machine you may be eligible

60 min

Note:  Talk to Kevin Cole in the PSC to request training.Range of Airflow: 0-168 mphCross Sectional Area: 24" X 24"Door Size: 22" X 44"This Wind Tunnel can use the  Aerolab and the AeroFMF Stings.Aerolab Specs:Max Normal Force: 25 lbs.

60 min

Note: Talk to Kevin Cole in the PSC to request training.Range of Airflow: 0-100 mphCross Sectional Area: 36" X 48"Door Size: 32" X 78"This Wind Tunnel can use both the  Aerolab and the AeroFMF Stings.Aerolab Specs:Max Normal Force: 25 lbs.M

60 min

*This machine requires training (~30 min.)Cross Sectional Area: 24 x 24 inchesTotal water capacity: 3025 gallonsMax flow rate: 5590 gpm (353 L/s)Velocity Range: 0.10 ft/s (0.03 m/s) to 3.00 ft/s (0.91 m/s)Note: This machine must only be operated by a

120 min

Available only on a First Come First Served basis (non-schedulable)Resolution: 240 x 180 pixelsThermal Range: -20 C to +120C / 0 C to 650 C

120 min

*This machine requires training (Please allow roughly 30 minutes at time of pickup for training if you have not already been trained)The recording time is governed by the size of the on-camera memory. The higher the frame rate, the shorter the record

60 min

Available only on a First Come First Served basis (non-schedulable)Works like a regular digital camera, and has capabilities to record at 240, 480 and 960 fps. (10, 20 and 40 times slower)Model Number: DSCRX100M4Included:-Camera-Battery and Char

60 min

Available only on a First Come First Served basis (non-schedulable)Works like a regular digital camera, and has capabilities to record at 240, 480 and 960 fps. (10, 20 and 40 times slower)Model Number: DSCRX100M4Included:-Camera-Battery and char

60 min

*This machine requires training (~30 min.)Resolution: .00005 inchesWidth: 6 inchesNote: This machine must only be operated by a trained user. If you anticipate being a heavy user of this machine you may be eligible to receive training to run the mach

60 min

*This machine requires training (~30 min.)Instron Model SI-1D3Weight of Strikers: 66.6 lb.Height of Drop: 4.51 ft.Impact Velocity: 17 ft/sRange of Capacity: 0-300 ft-lbs.Equipped to perform Charpy and Izod impact testsNote: This machine must onl

60 min

We provide many useful items available for checkout in EB 107. Items can be used for educational and personal purposes. Please note that all educational projects take priority over personal projects. Please stop by if you would like to check somethin

60 min

*This machine requires training Polisher for preparing metallurgical samples. Can be used for manual polishing or automatic polishing of 1.5" sample pucks. Note: This machine must only be operated by a trained user. Please request training

60 min

*This machine requires training Manual polisher for preparing metallurgical samplesNote: This machine must only be operated by a trained user. Please request training from Polishing Lab Supervisor or authorized student trainer.

60 min

*This machine requires training Manual polisher for preparing metallurgical samplesNote: This machine must only be operated by a trained user. Please request training from Polishing Lab Supervisor or authorized student trainer.

60 min

*This machine requires training and approval from Kevin Cole before use*Tensile tester for tensile or compressive loads.- Load/Torque Capacity (large sensor): 2,700 lbf / 1060 in*lb- Load/Torque Capacity (small sensor): 675 lbf / 260 in*lb- Length of

60 min

*This machine requires trainingResolution: <2.5 umMinimum Gauge Length: 2mmMaximum Elongation: >1000%, limited by field-of-view and gage lengthNote: This machine must only be operated by a trained user. If you anticipate being a heavy user

120 min

High speed cameraCamera Specs: Highest Resolution 1280x1024 @ 1069 FPS Highest Frame Rate 40413FPS @ 320x96 Internal Storage 16GB RAM Record time 8 seconds Lens mo

60 min

*This machine requires trainingSpecs:Test the hardness of surface at different points across a sampleNote: Please select "PSC Staff Assistance / Training" during the booking process to help you on your initial use of this piece of equipment. Otherwis

60 min